Shrinkage Measurements in Composite Beam Slabs
When the concrete slab on a composite beam shrinks, it is restrained by the steel beam to which it is connected. Tensile stresses, as a result, are developed in the restrained concrete...

Dynamic Response of an Infinite Beam Supported by a Fluid
The objective of this study is to investigate the dynamic response of an infinite beam supported by a fluid on one side, and subjected to dynamic loading on the other side. The fluid underneath...

Determination of In-Situ Stresses From Acoustic Emissions
Acoustic emissions (AE) are microseismic activities that are generated in concrete by cracking and damage. The rate of Acoustic Emissions, called the 'Event Rate', can provide indication...

Stress Wave Interaction in Finite Beam on Elastic Foundation
The short-time behavior of a finite Timeshenko beam on a Winkler foundation subjected to step and impulse loadings is presented. The transient behavior was analyzed by using the method...

Frequency Response of Disordered Periodic Structures
A computational procedure is given for calculating the frequency response of disordered periodic structures based on wave propagation theory. An ideal periodic structure is composed of...

Random Response of Multicrystalline Structures
An approach to the probabilistic modelling and analysis of multicrystalline microfabricated beams is presented with application to micro-electro-mechanical systems (MEMS). Random, textured...

Interaction Effects in the Hybrid Control of Euler-Bernoulli Beams
The effect of viscous and Voigt damping upon the open loop response of simple continua such as Euler-Bernoulli beams is well understood. However, when attempting to control a distributed...

The Generalized Brazier Problem for Orthotropic Straight Tubes of Finite Length
A new engineering approach, based upon a mixed variational functional, is presented for the analysis of the nonlinear static behavior of thin-walled, circular-cross-section cylindrical...

Experimental Investigation of Bending and Twisting Coupling in Thin-Walled Composite Beams
The behavior of a thin-walled ppen section composite material beam depends on the anisotropic mechanical properties of the panels that form the beam. A beam theory has been proposed for...

Eigenproperties of a Twisted, Nonuniform Rotating Beam by the Finite Element Method
A initially twisted blade with nonuniform properties along the length, is rotating with constant angular velocity about an axis perpendicular to it's elastic axis. The blade is modeled...

Evaluating Damage Detection in Bridges
Several researchers have recently considered using vibration monitoring of highway bridges as a means for detecting structural deterioration. Results to date have demonstrated that the...

Flexural and Shear Studies of Carbon Fiber Reinforced Beams
This paper presents the results of laboratory test on beams reinforced with three dimensional continuous carbon fiber grid. The grid is prefabricated by three-dimensional weaving and epoxy...

Stability of Beams in Eccentrically Braced Frames
As the link yields and strain hardens in an eccentrically braced frame, the beam segment-outside of the link is subject to a combination of high axial force and bending moment. For certain...

Stresses in Open Section Fiber Reinforced Composite Beams Under Constant Shear Loading
A strength of materials approach from the ply level is used to derive expressions for stresses in statically determinate open section composite beams subjected to constant shear loading....

Measuring Vibration in an Advanced Composite Beam with Localized Internal Fiber-Optic Strain Sensors
Two optical fibers embedded with different configurations were used separately as strain sensors to measure the natural frequencies and modal amplitudes of a cantilevered graphite/bismaleimide...

Probabilistic Analysis of Post-Tensioned Steel Girder Bridges
External post-tensioning is used as a means of strengthening existing steel girder bridges. Since absolute safety of structures is impossible to attain due to uncertainty in load and resistance,...

Pseudo-Simulation Method for Stochastic Problems
A new numerical method for problems of stochastic mechanics and other areas involving a small number of random parameters is presented. It is analogous to the Monte-Carlo simulation method...

Serviceability Analysis of Wood Beams with Creep
The effect of creep deformations on the serviceability reliability of single, dimension lumber wood beams is examined. A viscoelastic stress-strain relationship is used to model the time-dependent...

Spatial Variability Effects on the Seismic Response of Models of Bridges
The significance of the spatial variability (spatial incoherence and apparent propagation) of the seismic ground motions on the response of bridges, modeled as three-span symmetric beams,...

Reliability Consideration in Shakedown Analysis
Shakedown analysis for ductile rigid frames has shown that a structure can respond linearly at a higher elastic limit after it has experienced some plastic deformation. If the residual...

 

 

 

 

Return to search